
Jansen Ornamental Supply Co. El Monte, Ca. 800-423-4494 www.jansensupply.com
* 14 AWG loop wire designed for superior performance.
* Tested 3 ways with meg-ohm meter, inductance tester and live detector.
* Installation kit includes: cable ties, ground stakes, and loop lead-in labels.
* Easy to follow installation guide.
* Loop wire meets UL standard 493 for direct burial.
* MADE IN THE U.S.A.
* Pre-phased at factory for an easy hook-up.
Driveway Width Loop Size Part # Lead-in Wire Wt.
8 to 11 ft 4’ x 8’
24 ft Loop
PFL24
14 ga. x 60 ft. 4.5 lbs.
11.5 to 15 ft 6’ x 10’
32 ft Loop
PFL32
14 ga. X 60 ft. 5.1 lbs.
15.5 to 18 ft 6’ x 12’
36 ft Loop
PFL36
14 ga. x 60 ft. 5.5 lbs.
20 ft 6’ x 16’
44 ft Loop
PFL44
14 ga x 60 ft. ?
24 ft 6’ x 20’
52 ft Loop
PFL52
14 ga x 60 ft. ?
Driveway
Width
Loop Size Part # Lead-in Wire Wt.
8 to 11 ft 4’ x 8’
24 ft Loop
SCL24
14 ga. x 50 ft. 3.15 lbs.
11.5 to 15 ft 6’ x 10’
32 ft Loop
SCL32
14 ga. X 50 ft. 3.6 lbs.
15.5 to 18 ft 6’ x 12’
36 ft Loop
SCL36
14 ga. x 50 ft. 3.3 lbs.
20 ft 6’ x 16’
44 ft Loop
SCL44
14 ga x 50 ft. ?
24 ft 6’ x 20’
52 ft Loop
SCL52
14 ga x 50 ft. ?
* For installation in asphalt or concrete in a 3/16 saw-cut groove.
* 16 AWG loop wire design for superior performance.
* Tested 3 ways at the factory to insure performance.
* Easy to follow installation instructions.
* Built in backer rod and three levels of insulation to protect against failure.
* Pre-phased and color coded at factory for easy installation.
* No need to make 2nd saw-cut for lead-in. Lead-in and loop jacket are the
same size.
* MADE IN THE U.S.A.
Saw Cut Installation Large Kit
* 4 corner blocks with T-pins
* Pizza roller with ¾ inch PVC coupler for handle
* Caulk line with 1/8 inch T bar
* 2 each 1/8 inch masonry bit
* 2 each wax marker
* 135 degree wedge tool
* Can of clear spray
* Custom tool bag
* Groove Cleaning Air Wand
Direct Burial Preformed Loop
To be installed in a concrete pour, gravel road, under asphalt, and pavers
3/16” Preformed Saw Cut Loops
Install the highest quality loop, save time and reduce service calls.
The saw-cut loop has a built in backer-rod securely fitting a 3/16” saw-
cut groove eliminating the need to apply backer-rod to hold the loop to
the bottom of the saw-cut groove and requires 30-40% less loop seal-
ant to seal the groove.
Loopalator
The Free Loop Layout Calculator.
The BD LoopsLoopalator allows you to easily calculate the size
of the loop(s) you need. Visit our websitejansensupply.com for
your free copy (You will need Windows Excel with “marcos” en-
abled to work the calculator.)
TB-KIT
Special Order Sizes Available
Special Order Sizes Available
17-16
Access Gate Controls & Accessories
Comentarios a estos manuales