DoorKing 1812 El manual del propietario Pagina 42

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 53
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 41
4.2.3 Relay Activation
The 1812 system relays can be activated from the house. Refer to the tone open numbers that
where programmed in section 2.2.8 to determine each of the activation numbers.
Momentary Activation (Relay activates for its programmed strike time)
Hold Open (Relay will activate and remain activated).
Deactivate (Relay will deactivate)
Hold 1 Hour (Relay will activate for 1 hour and then automatically deactivate)
To activate the relay(s) from the resident’s house, perform the following steps.
1. Pick up your telephone and press * 7. [ * 7 (beep)]
2. Enter the desired tone open number (2.2.8). [ _ (beep)]
3. Hang up.
4.2.4 Relay Activation Check
The 1812 can be called to check if relay 1, relay 2, or both relays in the system are latched and
holding a door or gate in the open (unlocked) position.
1. Pick up resident’s telephone and press * 7. [ * 7 (beep)]
2. Listen for the following sequence of tones. No tones: neither relay is activated.
Relay 1 activated: beep - pause - beep - pause . . .Relay 2 activated: beep beep -
pause - beep beep - pause . . .Both relays activated: beep beep beep - pause -
beep beep beep - pause . . .
3. Hang up.
Page 42 1812-161-E-1-10
Vista de pagina 41
1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 52 53

Comentarios a estos manuales

Sin comentarios